Material - ABS-M30 (Acrylonitrile/butadiene/styrene)

ABS-M30 is 25-70 percent stronger than standard ABS and is an ideal material for conceptual prototyping, design verification, and direct digital manufacturing. ABS-M30 has greater tensile, impact and flexural strength than standard ABS. Layer bonding is significantly stronger than that of standard ABS, for a more durable part. This results in more realistic functional tests and higher quality parts for end use. When combined with a Stratasys FDM mc™ series system, ABS-M30 gives you Real Parts™ that are stronger, smoother and with better feature detail.

ABS-M30 is ideal for any of the following applications: form, fit , function, concept modeling, feature detail, snap-fits, vacuum metallization, electroplating, and as a master for RTV molding, vacuum forming and rapid manufacturing of end-use products.

Available Colors

Natural (off-white), black, dark gray, blue, and red. Color Examples

Note: On-screen and printer color representations may vary from actual colors.

Achievable Accuracy
FDM models are produced within an accuracy of +/- .005 inch (+/- .127 mm) up to 5 inches (127 mm).

Accuracy on models greater than 5 inches (127 mm) is +/- .0015% for both units.

Note: Accuracy is geometry dependent.

Maximum Build Dimensions*

• 16 x 14 x 16 (inch)

• 406 x 355 x 406 (mm)

*Larger parts can be built in pieces and bonded if necessary